by Phil | Jan 27, 2023 | General
Well almost 10 years have passed and the car is still sitting up on stands with very little done. I am finally going to get back into finishing this car off. First step was to get this site up and running not only as a possible helpful place for other builders but so...
by Phil | Nov 2, 2013 | Fuel
So after getting very annoyed trying to make my hard fuel lines Neat and straight, I gave up and went with efi hose for the full length. Ebay came to the rescue with some reasonably cheap Codan hose. A roll gave me enough to run the return hose from...
by Phil | Jan 16, 2013 | Interior
Whilst progress has been very slack with no real updates for almost a year now, I have finally got a bit of drive back to get this car off its stands and on the ground. The motivation came in the form of some pretty harnesses for Xmas! They were black 4 point Kit Car...
by Phil | Oct 6, 2012 | Fuel, Electrical
So after many weeks of no work I finally got into the shed to tick off a few very small items. Firstly was finishing off the rear end of the fuel plumbing. I fitted a 1/2″ outlet to my fuel tank and bought a Proflow fuel filter from American...
by Phil | Jul 18, 2012 | Electrical
So as part of the wiring I need to fit an electronic speed sensor / sender unit rather than the original cable type to the Toyota T50 5 speed transmission. There are a few ways from what I understand from angle drives to other units. Whilst most would work the Clubman...
Recent Comments